All articles
Guides

Medical Device Video Production: Filming a Physical Product

What to film and what to animate when your product is a physical device, what a device shoot actually involves, and what medical device video costs.

Cade November 7, 2026 9 min read
On this page What makes a device video different
  1. What makes a device video different
  2. What to film and what to build
  3. What a device shoot actually involves
  4. Two audiences, one object
  5. What a medical device video costs
  6. How we would approach your device
  7. FAQ

A medical device video has one advantage a software video never has. The product exists, so you can point a camera at it. What a camera cannot show is the part that usually matters most, which is what the device does once it is in place. Almost every decision on a device video comes out of that split.

Get it wrong in one direction and you have a beautiful product film that never explains the clinical value. Get it wrong in the other and you have an animation of something the buyer could have held in their hands at a trade show.

What makes a device video different

Most B2B video is made for products that have no physical form. The whole craft of explaining software is building something to look at, because there is nothing to film but a screen.

A device inverts that. You start with an object that is already interesting: machined, finished, designed to be picked up. Filming it is the cheapest credibility in the project, because a real thing on camera settles questions a rendering leaves open. What filming cannot reach is the inside of the device, the inside of the patient, and anything that happens too slowly or too small to see.

So a device video is usually both, and the useful question is not which medium you prefer. It is which half of your story lives where.

What to film and what to build

Work through what the video has to show, one item at a time, and the format decides itself.

What the video has to showHow it gets madeWhy
The device itselfFilmedA real object carries weight a render does not, and it is faster
Setup, handling, the workflow around itFilmedHands make it a procedure instead of a product shot
What happens inside the housingAnimatedNo camera gets there, and a cutaway prop looks like a prop
What happens inside the bodyAnimatedThe only way to show it, and the only way to keep it accurate
Readings, alerts, connected softwareScreen capture or rebuilt UIReproduced from the real interface, never approximated
The clinician or the patientFilmedCredibility comes from them being real

The middle two rows are the ones worth spending on. Everything else is a day of production. A mechanism built properly is where the budget goes, and it is also the only asset in the project that gets reused for years, in sales decks, training, trade show loops and the tender dossier.

One practical note. If you have CAD files for the device, we can work from them, which gives the model an accurate starting geometry. If you do not, the model gets built from the device and your drawings instead. Either way it needs materials, lighting and motion on top, and somebody on your engineering side should look at it before it is animated, because a geometrically perfect model can still move wrongly.

What a device shoot actually involves

Less drama than most teams expect, and most of the day goes on light.

A device is small, often polished, and frequently transparent. All three of those are lighting problems. A chrome housing mirrors whatever is in front of it, so a shoot is less about pointing lights at the object and more about building the room the object reflects. Clear plastics and glass need light coming through them rather than at them. This is the part of the day that looks like nothing is happening and determines whether the final video looks like a medical device or like a toy.

Shoot in three sizes for every step. A wide to orient the viewer, a mid to show the action, a macro for the detail that proves it. A seal closing, a display waking, the texture of a grip. Macro coverage is what people remember and it is almost always the shot that was not on the list.

Put hands in frame. A device alone is a product shot. A device with hands is a procedure. Scale, orientation and sequence all become obvious the moment somebody is holding it, and you stop needing a line of voiceover to explain which way up it goes. Whose hands they are, and whether your own clinicians or hired actors should be the ones holding it, is a separate decision, covered in our guide to animation and live action.

Get more than one video out of the setup. Once the object is lit and the crew is there, another angle or another cut costs very little compared with doing it again next quarter. Teams routinely leave a launch film, a sales version and a run of short social cuts on the table because nobody planned for them before the day.

Clinical environments are a different question. Filming in a live clinical setting depends on access and approvals that your own institution or your customer’s controls, and the lead time for that sits with them rather than with a production schedule. Worth knowing: most device videos do not need it. A workflow shot in a controlled space, with the device and the hands and the right coverage, answers the question the buyer is actually asking.

Two audiences, one object

The clinician and the person signing need different proof from the same device, and a single video has to carry both.

A clinician is evaluating whether it works in their hands: how it is held, how many steps it takes, what happens when something goes wrong. They are watching the handling. The buyer on the finance or procurement side is not evaluating the device at all. They are evaluating whether adopting it is worth the disruption, and they take their cue from whether the clinician in the room looks convinced.

So the handling detail is not a technical indulgence. It is what makes the clinical sponsor credible to the people sitting next to them. Cut it to save time and you have removed the thing that was doing the persuading. Our healthcare video guide goes further into writing for that committee.

What a medical device video costs

Apollo Studio projects range from $5,000 to $50,000+, all in. Script, storyboard, production, revisions and final cuts are inside the number, and nothing gets added once production starts.

Three things move a device project inside that range:

  • Shoot days. One day in a controlled space is the common case. Travel to your facility, or more than one location, adds to it.
  • How much gets built. A short mechanism sequence is a different project from a detailed anatomical build, and this is the single largest driver on most device videos.
  • Versions. Each extra length, aspect ratio or language is a separate edit.

Published rates in this category are usually quoted per minute of animation, which makes two quotes hard to compare and leaves the filming outside the number entirely. Convert everything into the same unit before you look at the figures. Our pricing breakdown covers how a quote gets built.

How we would approach your device

Apollo Studio makes product videos for technical companies, with animation and live action both in house, which means the film-or-build decision gets made on the merits rather than on what we happen to be able to do. You can see the work on our portfolio.

The order is the same on every project. The script comes first, so what the video claims is agreed before anything is designed. The storyboard is approved before production, which is where your regulatory and engineering reviewers see the scenes, the on-screen words and the mechanism while they are still quick to change. Then it gets built. An objection raised against a storyboard costs a storyboard edit. The same objection against a finished render costs the render.

FAQ

How much does a medical device video cost?

Apollo Studio projects range from $5,000 to $50,000+, all in, with script, storyboard, production, revisions and final cuts inside the number. Most projects land between $15,000 and $30,000. On a device project the biggest driver is how much has to be animated rather than filmed. Most published rates in this category are per minute of animation, so convert before comparing quotes.

Should a medical device video be animated or filmed?

Both, usually. Film the device, the handling and the people, because a real object and real hands carry credibility a render does not. Animate what no camera can reach: the inside of the housing, the mechanism in the body, anything too small or too slow to see. Deciding this at the script stage is what keeps the budget predictable.

Can you film a device in use?

Yes. A workflow shot in a controlled space, with the device, the hands and coverage of every step, answers what most buyers are asking. Filming in a live clinical setting is a separate question, because access and approvals are controlled by the institution rather than by the production, and the lead time sits with them.

Do you need CAD files to animate a device?

They help. If you have CAD, we can work from it, which gives the model accurate geometry to start from. If you do not, the model gets built from the device and your drawings. Either way the files are a starting point rather than a finished asset, because materials, lighting and motion still have to be built on top, and somebody on your engineering side should review the movement.

What is a mechanism of action video?

A short animation showing how a device or therapy works once it is in place: what it does inside the housing, inside the body, or to the tissue around it. It exists because the thing it shows cannot be filmed. Of everything in a device project it tends to have the longest life, running in sales decks, training and trade show loops for years.

Who makes videos for medical device companies?

Specialist medical animation studios, B2B video studios, and generalist production companies. The filter worth applying is whether they can both shoot and animate, because a studio that only renders will recommend animating a device you could have filmed. Also ask what is inside the price, and who writes the script. This list of B2B video production companies is a starting point for a shortlist.


Cade is the founder of Apollo Studio, a B2B video studio in Utah making product videos and customer stories for SaaS, AI, and fintech companies, including teams selling into healthcare.

Ready to make video that moves pipeline?

Apollo is a B2B video agency for SaaS, AI, fintech, and more. Tell us where your deals stall and we'll help you make the video that gets them unstuck.

Book a Call